Verification run c81d12b2ea15
Captured output from the Testnet Radar verification harness. Every command below was read out of content/guides/canopy.mdx in the order the page publishes it, and executed as root in a throwaway ubuntu container that was destroyed afterwards. A clean run proves the published commands execute; it does not prove the node works.
Provenance
- result
- PASSED3 of 3 command block(s) executed
- coverage
- PREFIX ONLY — through “Step 3: Get the node repository”Step 4 asks for a password at a prompt the harness cannot answer, and every step after it drives Docker Compose, which the sandbox refuses to run.never run: Step 4: Generate the node's key · Step 5: Start the node · Verify your node · Points, rewards, and what is actually known
- ran
- → (84.4 s)
- guide
- content/guides/canopy.mdx
- commands sha256
- a0fa4a7d066218875941f50c999bf4392d6ae0b6af87a26ccc4efcdf02fe9960
- guide sha256
- f779f63b3426ce69acb465739f6a3c11677ec1d40ab3c77465a39715032c0e43
- image
- ubuntu@sha256:33ceb71981b602c1a7443a53469e4dba065f7503eab3078a2d7a57a2ab987517
- harness sha256
- a0a1d222b9ef7b3102f800c0c607acda03d5a6ef9e5cca4ae8133a4d69e0c742
- transcript sha256
- 182f4cf2de327bd612b5327ce3ef78af85a7714f0b6fc9c5d903b8a874647100
- limits
- cpus=1.0 memory=2g pids=256 network=bridge
- host
- docker 29.7.2 · linux/amd64 · 6.6.87.2-microsoft-standard-WSL2
- artifact
- harness/artifacts/canopy/c81d12b2ea15.json · harness/artifacts/canopy/c81d12b2ea15.txt(schemaVersion 3)
This transcript is verbatim. Nothing matched a known secret shape, so nothing was removed: what is printed below is what the container printed, byte for byte. The transcript sha256 above covers exactly these bytes and can be recomputed from them.
Transcript
Rendered exactly as harness/artifacts/canopy/c81d12b2ea15.txt sits in the repository — same bytes, same order, nothing folded away.
========================================================================
Testnet Radar verification run — canopy
========================================================================
result PASSED
commands 3 of 3 executed
coverage PREFIX ONLY — through "Step 3: Get the node repository"
stop reason Step 4 asks for a password at a prompt the harness cannot answer, and every step after it drives Docker Compose, which the sandbox refuses to run.
NOT RUN "Step 4: Generate the node's key", "Step 5: Start the node", "Verify your node", "Points, rewards, and what is actually known"
run id c81d12b2ea15
guide content/guides/canopy.mdx
guide sha256 f779f63b3426ce69acb465739f6a3c11677ec1d40ab3c77465a39715032c0e43
commands sha a0fa4a7d066218875941f50c999bf4392d6ae0b6af87a26ccc4efcdf02fe9960
started 2026-09-03T09:13:28.460Z
finished 2026-09-03T09:14:52.847Z (84387 ms)
image ubuntu@sha256:33ceb71981b602c1a7443a53469e4dba065f7503eab3078a2d7a57a2ab987517
host docker 29.7.2 · linux/amd64 · 6.6.87.2-microsoft-standard-WSL2
limits cpus=1.0 memory=2g pids=256 network=bridge
harness a0a1d222b9ef7b3102f800c0c607acda03d5a6ef9e5cca4ae8133a4d69e0c742
redactions none
========================================================================
PREAMBLE — harness setup, not guide content
========================================================================
$ install /usr/local/bin/sudo (harness shim)
exit 0
$ write /etc/gitconfig — [http] version = HTTP/1.1 (harness environment, not a guide command)
exit 0
========================================================================
[1/3] Step 2: Install Docker, make and git — line 292
========================================================================
command (9 lines, verbatim from the guide):
sudo apt update
sudo apt install -y ca-certificates curl gnupg lsb-release
sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg
echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
sudo apt update
sudo apt install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
sudo apt install -y make
sudo apt install -y git
stdout:
Get:1 http://security.ubuntu.com/ubuntu noble-security InRelease [126 kB]
Get:2 http://security.ubuntu.com/ubuntu noble-security/multiverse amd64 Packages [50.0 kB]
Get:3 http://archive.ubuntu.com/ubuntu noble InRelease [256 kB]
Get:4 http://security.ubuntu.com/ubuntu noble-security/main amd64 Packages [1211 kB]
Get:5 http://security.ubuntu.com/ubuntu noble-security/restricted amd64 Packages [1730 kB]
Get:6 http://security.ubuntu.com/ubuntu noble-security/universe amd64 Packages [1529 kB]
Get:7 http://archive.ubuntu.com/ubuntu noble-updates InRelease [126 kB]
Get:8 http://archive.ubuntu.com/ubuntu noble-backports InRelease [126 kB]
Get:9 http://archive.ubuntu.com/ubuntu noble/restricted amd64 Packages [117 kB]
Get:10 http://archive.ubuntu.com/ubuntu noble/multiverse amd64 Packages [331 kB]
Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 Packages [1808 kB]
Get:12 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages [19.3 MB]
Get:13 http://archive.ubuntu.com/ubuntu noble-updates/multiverse amd64 Packages [55.8 kB]
Get:14 http://archive.ubuntu.com/ubuntu noble-updates/universe amd64 Packages [2150 kB]
Get:15 http://archive.ubuntu.com/ubuntu noble-updates/restricted amd64 Packages [1852 kB]
Get:16 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 Packages [1532 kB]
Get:17 http://archive.ubuntu.com/ubuntu noble-backports/multiverse amd64 Packages [671 B]
Get:18 http://archive.ubuntu.com/ubuntu noble-backports/main amd64 Packages [48.9 kB]
Get:19 http://archive.ubuntu.com/ubuntu noble-backports/universe amd64 Packages [35.9 kB]
Fetched 32.4 MB in 8s (4018 kB/s)
Reading package lists...
Building dependency tree...
Reading state information...
26 packages can be upgraded. Run 'apt list --upgradable' to see them.
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
adduser dirmngr gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpgconf
gpgsm keyboxd krb5-locales libbrotli1 libcurl4t64 libgssapi-krb5-2
libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libksba8 libldap-common
libldap2 libnghttp2-14 libpsl5t64 libreadline8t64 librtmp1 libsasl2-2
libsasl2-modules libsasl2-modules-db libsqlite3-0 libssh-4 libssl3t64
openssl pinentry-curses publicsuffix readline-common
Suggested packages:
liblocale-gettext-perl perl cron quota ecryptfs-utils dbus-user-session
libpam-systemd pinentry-gnome3 tor parcimonie xloadimage gpg-wks-server
scdaemon krb5-doc krb5-user libsasl2-modules-gssapi-mit
| libsasl2-modules-gssapi-heimdal libsasl2-modules-ldap libsasl2-modules-otp
libsasl2-modules-sql pinentry-doc readline-doc
The following NEW packages will be installed:
adduser ca-certificates curl dirmngr gnupg gnupg-l10n gnupg-utils gpg
gpg-agent gpg-wks-client gpgconf gpgsm keyboxd krb5-locales libbrotli1
libcurl4t64 libgssapi-krb5-2 libk5crypto3 libkeyutils1 libkrb5-3
libkrb5support0 libksba8 libldap-common libldap2 libnghttp2-14 libpsl5t64
libreadline8t64 librtmp1 libsasl2-2 libsasl2-modules libsasl2-modules-db
libsqlite3-0 libssh-4 lsb-release openssl pinentry-curses publicsuffix
readline-common
The following packages will be upgraded:
libssl3t64
1 upgraded, 38 newly installed, 0 to remove and 25 not upgraded.
Need to get 8810 kB of archives.
After this operation, 17.5 MB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libssl3t64 amd64 3.0.13-0ubuntu3.15 [1944 kB]
Get:2 http://archive.ubuntu.com/ubuntu noble/main amd64 adduser all 3.137ubuntu1 [101 kB]
Get:3 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 openssl amd64 3.0.13-0ubuntu3.15 [1003 kB]
Get:4 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 ca-certificates all 20260601~24.04.1 [139 kB]
Get:5 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 krb5-locales all 1.20.1-6ubuntu2.8 [15.1 kB]
Get:6 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libkrb5support0 amd64 1.20.1-6ubuntu2.8 [34.7 kB]
Get:7 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libk5crypto3 amd64 1.20.1-6ubuntu2.8 [81.9 kB]
Get:8 http://archive.ubuntu.com/ubuntu noble/main amd64 libkeyutils1 amd64 1.6.3-3build1 [9490 B]
Get:9 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libkrb5-3 amd64 1.20.1-6ubuntu2.8 [348 kB]
Get:10 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libgssapi-krb5-2 amd64 1.20.1-6ubuntu2.8 [143 kB]
Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 readline-common all 8.2-4build1 [56.5 kB]
Get:12 http://archive.ubuntu.com/ubuntu noble/main amd64 libreadline8t64 amd64 8.2-4build1 [153 kB]
Get:13 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libsqlite3-0 amd64 3.45.1-1ubuntu2.7 [701 kB]
Get:14 http://archive.ubuntu.com/ubuntu noble/main amd64 lsb-release all 12.0-2 [6564 B]
Get:15 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libnghttp2-14 amd64 1.59.0-1ubuntu0.4 [74.6 kB]
Get:16 http://archive.ubuntu.com/ubuntu noble/main amd64 libpsl5t64 amd64 0.21.2-1.1build1 [57.1 kB]
Get:17 http://archive.ubuntu.com/ubuntu noble/main amd64 publicsuffix all 20231001.0357-0.1 [129 kB]
Get:18 http://archive.ubuntu.com/ubuntu noble/main amd64 libbrotli1 amd64 1.1.0-2build2 [331 kB]
Get:19 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libsasl2-modules-db amd64 2.1.28+dfsg1-5ubuntu3.1 [20.4 kB]
Get:20 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libsasl2-2 amd64 2.1.28+dfsg1-5ubuntu3.1 [53.2 kB]
Get:21 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libldap2 amd64 2.6.10+dfsg-0ubuntu0.24.04.1 [198 kB]
Get:22 http://archive.ubuntu.com/ubuntu noble/main amd64 librtmp1 amd64 2.4+20151223.gitfa8646d.1-2build7 [56.3 kB]
Get:23 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libssh-4 amd64 0.10.6-2ubuntu0.5 [191 kB]
Get:24 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libcurl4t64 amd64 8.5.0-2ubuntu10.13 [343 kB]
Get:25 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 curl amd64 8.5.0-2ubuntu10.13 [226 kB]
Get:26 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gpgconf amd64 2.4.4-2ubuntu17.4 [104 kB]
Get:27 http://archive.ubuntu.com/ubuntu noble/main amd64 libksba8 amd64 1.6.6-1build1 [122 kB]
Get:28 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dirmngr amd64 2.4.4-2ubuntu17.4 [323 kB]
Get:29 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gnupg-utils amd64 2.4.4-2ubuntu17.4 [109 kB]
Get:30 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gpg amd64 2.4.4-2ubuntu17.4 [565 kB]
Get:31 http://archive.ubuntu.com/ubuntu noble/main amd64 pinentry-curses amd64 1.2.1-3ubuntu5 [35.2 kB]
Get:32 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gpg-agent amd64 2.4.4-2ubuntu17.4 [227 kB]
Get:33 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gpgsm amd64 2.4.4-2ubuntu17.4 [232 kB]
Get:34 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 keyboxd amd64 2.4.4-2ubuntu17.4 [78.3 kB]
Get:35 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gnupg all 2.4.4-2ubuntu17.4 [359 kB]
Get:36 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gnupg-l10n all 2.4.4-2ubuntu17.4 [66.4 kB]
Get:37 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gpg-wks-client amd64 2.4.4-2ubuntu17.4 [70.8 kB]
Get:38 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libldap-common all 2.6.10+dfsg-0ubuntu0.24.04.1 [32.9 kB]
Get:39 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libsasl2-modules amd64 2.1.28+dfsg1-5ubuntu3.1 [69.9 kB]
Fetched 8810 kB in 10s (858 kB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 4381 files and directories currently installed.)
Preparing to unpack .../libssl3t64_3.0.13-0ubuntu3.15_amd64.deb ...
Unpacking libssl3t64:amd64 (3.0.13-0ubuntu3.15) over (3.0.13-0ubuntu3.12) ...
Setting up libssl3t64:amd64 (3.0.13-0ubuntu3.15) ...
Selecting previously unselected package adduser.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 4381 files and directories currently installed.)
Preparing to unpack .../adduser_3.137ubuntu1_all.deb ...
Unpacking adduser (3.137ubuntu1) ...
Setting up adduser (3.137ubuntu1) ...
Selecting previously unselected package openssl.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 4429 files and directories currently installed.)
Preparing to unpack .../00-openssl_3.0.13-0ubuntu3.15_amd64.deb ...
Unpacking openssl (3.0.13-0ubuntu3.15) ...
Selecting previously unselected package ca-certificates.
Preparing to unpack .../01-ca-certificates_20260601~24.04.1_all.deb ...
Unpacking ca-certificates (20260601~24.04.1) ...
Selecting previously unselected package krb5-locales.
Preparing to unpack .../02-krb5-locales_1.20.1-6ubuntu2.8_all.deb ...
Unpacking krb5-locales (1.20.1-6ubuntu2.8) ...
Selecting previously unselected package libkrb5support0:amd64.
Preparing to unpack .../03-libkrb5support0_1.20.1-6ubuntu2.8_amd64.deb ...
Unpacking libkrb5support0:amd64 (1.20.1-6ubuntu2.8) ...
Selecting previously unselected package libk5crypto3:amd64.
Preparing to unpack .../04-libk5crypto3_1.20.1-6ubuntu2.8_amd64.deb ...
Unpacking libk5crypto3:amd64 (1.20.1-6ubuntu2.8) ...
Selecting previously unselected package libkeyutils1:amd64.
Preparing to unpack .../05-libkeyutils1_1.6.3-3build1_amd64.deb ...
Unpacking libkeyutils1:amd64 (1.6.3-3build1) ...
Selecting previously unselected package libkrb5-3:amd64.
Preparing to unpack .../06-libkrb5-3_1.20.1-6ubuntu2.8_amd64.deb ...
Unpacking libkrb5-3:amd64 (1.20.1-6ubuntu2.8) ...
Selecting previously unselected package libgssapi-krb5-2:amd64.
Preparing to unpack .../07-libgssapi-krb5-2_1.20.1-6ubuntu2.8_amd64.deb ...
Unpacking libgssapi-krb5-2:amd64 (1.20.1-6ubuntu2.8) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../08-readline-common_8.2-4build1_all.deb ...
Unpacking readline-common (8.2-4build1) ...
Selecting previously unselected package libreadline8t64:amd64.
Preparing to unpack .../09-libreadline8t64_8.2-4build1_amd64.deb ...
Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8 to /lib/x86_64-linux-gnu/libhistory.so.8.usr-is-merged by libreadline8t64'
Adding 'diversion of /lib/x86_64-linux-gnu/libhistory.so.8.2 to /lib/x86_64-linux-gnu/libhistory.so.8.2.usr-is-merged by libreadline8t64'
Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8 to /lib/x86_64-linux-gnu/libreadline.so.8.usr-is-merged by libreadline8t64'
Adding 'diversion of /lib/x86_64-linux-gnu/libreadline.so.8.2 to /lib/x86_64-linux-gnu/libreadline.so.8.2.usr-is-merged by libreadline8t64'
Unpacking libreadline8t64:amd64 (8.2-4build1) ...
Selecting previously unselected package libsqlite3-0:amd64.
Preparing to unpack .../10-libsqlite3-0_3.45.1-1ubuntu2.7_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.45.1-1ubuntu2.7) ...
Selecting previously unselected package lsb-release.
Preparing to unpack .../11-lsb-release_12.0-2_all.deb ...
Unpacking lsb-release (12.0-2) ...
Selecting previously unselected package libnghttp2-14:amd64.
Preparing to unpack .../12-libnghttp2-14_1.59.0-1ubuntu0.4_amd64.deb ...
Unpacking libnghttp2-14:amd64 (1.59.0-1ubuntu0.4) ...
Selecting previously unselected package libpsl5t64:amd64.
Preparing to unpack .../13-libpsl5t64_0.21.2-1.1build1_amd64.deb ...
Unpacking libpsl5t64:amd64 (0.21.2-1.1build1) ...
Selecting previously unselected package publicsuffix.
Preparing to unpack .../14-publicsuffix_20231001.0357-0.1_all.deb ...
Unpacking publicsuffix (20231001.0357-0.1) ...
Selecting previously unselected package libbrotli1:amd64.
Preparing to unpack .../15-libbrotli1_1.1.0-2build2_amd64.deb ...
Unpacking libbrotli1:amd64 (1.1.0-2build2) ...
Selecting previously unselected package libsasl2-modules-db:amd64.
Preparing to unpack .../16-libsasl2-modules-db_2.1.28+dfsg1-5ubuntu3.1_amd64.deb ...
Unpacking libsasl2-modules-db:amd64 (2.1.28+dfsg1-5ubuntu3.1) ...
Selecting previously unselected package libsasl2-2:amd64.
Preparing to unpack .../17-libsasl2-2_2.1.28+dfsg1-5ubuntu3.1_amd64.deb ...
Unpacking libsasl2-2:amd64 (2.1.28+dfsg1-5ubuntu3.1) ...
Selecting previously unselected package libldap2:amd64.
Preparing to unpack .../18-libldap2_2.6.10+dfsg-0ubuntu0.24.04.1_amd64.deb ...
Unpacking libldap2:amd64 (2.6.10+dfsg-0ubuntu0.24.04.1) ...
Selecting previously unselected package librtmp1:amd64.
Preparing to unpack .../19-librtmp1_2.4+20151223.gitfa8646d.1-2build7_amd64.deb ...
Unpacking librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2build7) ...
Selecting previously unselected package libssh-4:amd64.
Preparing to unpack .../20-libssh-4_0.10.6-2ubuntu0.5_amd64.deb ...
Unpacking libssh-4:amd64 (0.10.6-2ubuntu0.5) ...
Selecting previously unselected package libcurl4t64:amd64.
Preparing to unpack .../21-libcurl4t64_8.5.0-2ubuntu10.13_amd64.deb ...
Unpacking libcurl4t64:amd64 (8.5.0-2ubuntu10.13) ...
Selecting previously unselected package curl.
Preparing to unpack .../22-curl_8.5.0-2ubuntu10.13_amd64.deb ...
Unpacking curl (8.5.0-2ubuntu10.13) ...
Selecting previously unselected package gpgconf.
Preparing to unpack .../23-gpgconf_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking gpgconf (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package libksba8:amd64.
Preparing to unpack .../24-libksba8_1.6.6-1build1_amd64.deb ...
Unpacking libksba8:amd64 (1.6.6-1build1) ...
Selecting previously unselected package dirmngr.
Preparing to unpack .../25-dirmngr_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking dirmngr (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package gnupg-utils.
Preparing to unpack .../26-gnupg-utils_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking gnupg-utils (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package gpg.
Preparing to unpack .../27-gpg_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking gpg (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package pinentry-curses.
Preparing to unpack .../28-pinentry-curses_1.2.1-3ubuntu5_amd64.deb ...
Unpacking pinentry-curses (1.2.1-3ubuntu5) ...
Selecting previously unselected package gpg-agent.
Preparing to unpack .../29-gpg-agent_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking gpg-agent (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package gpgsm.
Preparing to unpack .../30-gpgsm_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking gpgsm (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package keyboxd.
Preparing to unpack .../31-keyboxd_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking keyboxd (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package gnupg.
Preparing to unpack .../32-gnupg_2.4.4-2ubuntu17.4_all.deb ...
Unpacking gnupg (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package gnupg-l10n.
Preparing to unpack .../33-gnupg-l10n_2.4.4-2ubuntu17.4_all.deb ...
Unpacking gnupg-l10n (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package gpg-wks-client.
Preparing to unpack .../34-gpg-wks-client_2.4.4-2ubuntu17.4_amd64.deb ...
Unpacking gpg-wks-client (2.4.4-2ubuntu17.4) ...
Selecting previously unselected package libldap-common.
Preparing to unpack .../35-libldap-common_2.6.10+dfsg-0ubuntu0.24.04.1_all.deb ...
Unpacking libldap-common (2.6.10+dfsg-0ubuntu0.24.04.1) ...
Selecting previously unselected package libsasl2-modules:amd64.
Preparing to unpack .../36-libsasl2-modules_2.1.28+dfsg1-5ubuntu3.1_amd64.deb ...
Unpacking libsasl2-modules:amd64 (2.1.28+dfsg1-5ubuntu3.1) ...
Setting up libksba8:amd64 (1.6.6-1build1) ...
Setting up pinentry-curses (1.2.1-3ubuntu5) ...
Setting up libkeyutils1:amd64 (1.6.3-3build1) ...
Setting up libbrotli1:amd64 (1.1.0-2build2) ...
Setting up libsqlite3-0:amd64 (3.45.1-1ubuntu2.7) ...
Setting up libsasl2-modules:amd64 (2.1.28+dfsg1-5ubuntu3.1) ...
Setting up libpsl5t64:amd64 (0.21.2-1.1build1) ...
Setting up libnghttp2-14:amd64 (1.59.0-1ubuntu0.4) ...
Setting up krb5-locales (1.20.1-6ubuntu2.8) ...
Setting up libldap-common (2.6.10+dfsg-0ubuntu0.24.04.1) ...
Setting up libkrb5support0:amd64 (1.20.1-6ubuntu2.8) ...
Setting up libsasl2-modules-db:amd64 (2.1.28+dfsg1-5ubuntu3.1) ...
Setting up gnupg-l10n (2.4.4-2ubuntu17.4) ...
Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2build7) ...
Setting up libk5crypto3:amd64 (1.20.1-6ubuntu2.8) ...
Setting up libsasl2-2:amd64 (2.1.28+dfsg1-5ubuntu3.1) ...
Setting up libkrb5-3:amd64 (1.20.1-6ubuntu2.8) ...
Setting up lsb-release (12.0-2) ...
Setting up openssl (3.0.13-0ubuntu3.15) ...
Setting up readline-common (8.2-4build1) ...
Setting up publicsuffix (20231001.0357-0.1) ...
Setting up libldap2:amd64 (2.6.10+dfsg-0ubuntu0.24.04.1) ...
Setting up gnupg-utils (2.4.4-2ubuntu17.4) ...
Setting up ca-certificates (20260601~24.04.1) ...
Updating certificates in /etc/ssl/certs...
121 added, 0 removed; done.
Setting up libgssapi-krb5-2:amd64 (1.20.1-6ubuntu2.8) ...
Setting up libssh-4:amd64 (0.10.6-2ubuntu0.5) ...
Setting up libreadline8t64:amd64 (8.2-4build1) ...
Setting up gpgconf (2.4.4-2ubuntu17.4) ...
Setting up gpg (2.4.4-2ubuntu17.4) ...
Setting up gpg-agent (2.4.4-2ubuntu17.4) ...
Setting up libcurl4t64:amd64 (8.5.0-2ubuntu10.13) ...
Setting up gpgsm (2.4.4-2ubuntu17.4) ...
Setting up dirmngr (2.4.4-2ubuntu17.4) ...
Setting up keyboxd (2.4.4-2ubuntu17.4) ...
Setting up gnupg (2.4.4-2ubuntu17.4) ...
Setting up curl (8.5.0-2ubuntu10.13) ...
Setting up gpg-wks-client (2.4.4-2ubuntu17.4) ...
Processing triggers for libc-bin (2.39-0ubuntu8.8) ...
Processing triggers for ca-certificates (20260601~24.04.1) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Hit:1 http://security.ubuntu.com/ubuntu noble-security InRelease
Get:2 https://download.docker.com/linux/ubuntu noble InRelease [48.5 kB]
Get:3 https://download.docker.com/linux/ubuntu noble/stable amd64 Packages [77.6 kB]
Hit:4 http://archive.ubuntu.com/ubuntu noble InRelease
Hit:5 http://archive.ubuntu.com/ubuntu noble-updates InRelease
Hit:6 http://archive.ubuntu.com/ubuntu noble-backports InRelease
Fetched 126 kB in 1s (207 kB/s)
Reading package lists...
Building dependency tree...
Reading state information...
25 packages can be upgraded. Run 'apt list --upgradable' to see them.
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
apparmor bsdutils dbus dbus-bin dbus-daemon dbus-session-bus-common
dbus-system-bus-common dbus-user-session dmsetup docker-ce-rootless-extras
gir1.2-girepository-2.0 gir1.2-glib-2.0 git git-man iptables less
libapparmor1 libargon2-1 libblkid1 libbsd0 libcbor0.10 libcryptsetup12
libcurl3t64-gnutls libdbus-1-3 libdevmapper1.02.1 libedit2 liberror-perl
libexpat1 libfdisk1 libfido2-1 libgdbm-compat4t64 libgdbm6t64
libgirepository-1.0-1 libglib2.0-0t64 libglib2.0-data libicu74 libip4tc2
libip6tc2 libjansson4 libjson-c5 libkmod2 libmnl0 libmount1
libnetfilter-conntrack3 libnfnetlink0 libnftables1 libnftnl11 libnss-systemd
libpam-systemd libperl5.38t64 libpython3-stdlib libpython3.12-minimal
libpython3.12-stdlib libsmartcols1 libsystemd-shared libuuid1 libx11-6
libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxml2 libxmuu1 libxtables12
media-types mount netbase networkd-dispatcher nftables openssh-client patch
perl perl-base perl-modules-5.38 pigz python3 python3-dbus python3-gi
python3-minimal python3.12 python3.12-minimal shared-mime-info systemd
systemd-dev systemd-resolved systemd-sysv systemd-timesyncd tzdata
util-linux xauth xdg-user-dirs xz-utils
Suggested packages:
apparmor-profiles-extra apparmor-utils cgroupfs-mount | cgroup-lite
docker-model-plugin gettext-base git-daemon-run | git-daemon-sysvinit
git-doc git-email git-gui gitk gitweb git-cvs git-mediawiki git-svn
firewalld kmod gdbm-l10n low-memory-monitor cryptsetup-bin nfs-common iw
| wireless-tools keychain libpam-ssh monkeysphere ssh-askpass ed
diffutils-doc perl-doc libterm-readline-gnu-perl
| libterm-readline-perl-perl make libtap-harness-archive-perl python3-doc
python3-tk python3-venv python-dbus-doc python3.12-venv python3.12-doc
binutils binfmt-support systemd-container systemd-homed systemd-userdbd
systemd-boot libqrencode4 libtss2-esys-3.0.2-0 libtss2-mu-4.0.1-0
libtss2-rc0 libtss2-tcti-device0 polkitd dosfstools kbd util-linux-extra
util-linux-locales
Recommended packages:
bsdextrautils uuid-runtime
The following NEW packages will be installed:
apparmor containerd.io dbus dbus-bin dbus-daemon dbus-session-bus-common
dbus-system-bus-common dbus-user-session dmsetup docker-buildx-plugin
docker-ce docker-ce-cli docker-ce-rootless-extras docker-compose-plugin
gir1.2-girepository-2.0 gir1.2-glib-2.0 git git-man iptables less
libapparmor1 libargon2-1 libbsd0 libcbor0.10 libcryptsetup12
libcurl3t64-gnutls libdbus-1-3 libdevmapper1.02.1 libedit2 liberror-perl
libexpat1 libfdisk1 libfido2-1 libgdbm-compat4t64 libgdbm6t64
libgirepository-1.0-1 libglib2.0-0t64 libglib2.0-data libicu74 libip4tc2
libip6tc2 libjansson4 libjson-c5 libkmod2 libmnl0 libnetfilter-conntrack3
libnfnetlink0 libnftables1 libnftnl11 libnss-systemd libpam-systemd
libperl5.38t64 libpython3-stdlib libpython3.12-minimal libpython3.12-stdlib
libsystemd-shared libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6
libxml2 libxmuu1 libxtables12 media-types netbase networkd-dispatcher
nftables openssh-client patch perl perl-modules-5.38 pigz python3
python3-dbus python3-gi python3-minimal python3.12 python3.12-minimal
shared-mime-info systemd systemd-dev systemd-resolved systemd-sysv
systemd-timesyncd tzdata xauth xdg-user-dirs xz-utils
The following packages will be upgraded:
bsdutils libblkid1 libmount1 libsmartcols1 libuuid1 mount perl-base
util-linux
8 upgraded, 90 newly installed, 0 to remove and 17 not upgraded.
Need to get 152 MB of archives.
After this operation, 588 MB of additional disk space will be used.
Get:1 https://download.docker.com/linux/ubuntu noble/stable amd64 containerd.io amd64 2.3.4-1~ubuntu.24.04~noble [22.7 MB]
Get:2 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 bsdutils amd64 1:2.39.3-9ubuntu6.6 [96.4 kB]
Get:3 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 perl-base amd64 5.38.2-3.2ubuntu0.4 [1826 kB]
Get:4 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 util-linux amd64 2.39.3-9ubuntu6.6 [1128 kB]
Get:5 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 mount amd64 2.39.3-9ubuntu6.6 [118 kB]
Get:6 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libpython3.12-minimal amd64 3.12.3-1ubuntu0.16 [838 kB]
Get:7 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libexpat1 amd64 2.6.1-2ubuntu0.4 [88.2 kB]
Get:8 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 python3.12-minimal amd64 3.12.3-1ubuntu0.16 [2335 kB]
Get:9 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 python3-minimal amd64 3.12.3-0ubuntu2.1 [27.4 kB]
Get:10 http://archive.ubuntu.com/ubuntu noble/main amd64 media-types all 10.1.0 [27.5 kB]
Get:11 http://archive.ubuntu.com/ubuntu noble/main amd64 netbase all 6.4 [13.1 kB]
Get:12 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 tzdata all 2026c-0ubuntu0.24.04.1 [280 kB]
Get:13 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libpython3.12-stdlib amd64 3.12.3-1ubuntu0.16 [2070 kB]
Get:14 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 python3.12 amd64 3.12.3-1ubuntu0.16 [651 kB]
Get:15 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libpython3-stdlib amd64 3.12.3-0ubuntu2.1 [10.1 kB]
Get:16 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 python3 amd64 3.12.3-0ubuntu2.1 [23.0 kB]
Get:17 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libapparmor1 amd64 4.0.1really4.0.1-0ubuntu0.24.04.7 [51.3 kB]
Get:18 http://archive.ubuntu.com/ubuntu noble/main amd64 libargon2-1 amd64 0~20190702+dfsg-4build1 [20.8 kB]
Get:19 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libblkid1 amd64 2.39.3-9ubuntu6.6 [124 kB]
Get:20 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdevmapper1.02.1 amd64 2:1.02.185-3ubuntu3.2 [139 kB]
Get:21 http://archive.ubuntu.com/ubuntu noble/main amd64 libjson-c5 amd64 0.17-1build1 [35.3 kB]
Get:22 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libuuid1 amd64 2.39.3-9ubuntu6.6 [36.6 kB]
Get:23 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libcryptsetup12 amd64 2:2.7.0-1ubuntu4.2 [266 kB]
Get:24 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libfdisk1 amd64 2.39.3-9ubuntu6.6 [146 kB]
Get:25 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libkmod2 amd64 31+20240202-2ubuntu7.2 [51.8 kB]
Get:26 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libmount1 amd64 2.39.3-9ubuntu6.6 [134 kB]
Get:27 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libsystemd-shared amd64 255.4-1ubuntu8.17 [2077 kB]
Get:28 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 systemd-dev all 255.4-1ubuntu8.17 [107 kB]
Get:29 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 systemd amd64 255.4-1ubuntu8.17 [3475 kB]
Get:30 https://download.docker.com/linux/ubuntu noble/stable amd64 docker-ce-cli amd64 5:29.7.2-1~ubuntu.24.04~noble [17.0 MB]
Get:31 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 systemd-sysv amd64 255.4-1ubuntu8.17 [11.9 kB]
Get:32 http://archive.ubuntu.com/ubuntu noble/main amd64 libip4tc2 amd64 1.8.10-3ubuntu2 [23.3 kB]
Get:33 http://archive.ubuntu.com/ubuntu noble/main amd64 libip6tc2 amd64 1.8.10-3ubuntu2 [23.7 kB]
Get:34 http://archive.ubuntu.com/ubuntu noble/main amd64 libxtables12 amd64 1.8.10-3ubuntu2 [35.7 kB]
Get:35 http://archive.ubuntu.com/ubuntu noble/main amd64 libmnl0 amd64 1.0.5-2build1 [12.3 kB]
Get:36 http://archive.ubuntu.com/ubuntu noble/main amd64 libnfnetlink0 amd64 1.0.2-2build1 [14.8 kB]
Get:37 http://archive.ubuntu.com/ubuntu noble/main amd64 libnetfilter-conntrack3 amd64 1.0.9-6build1 [45.2 kB]
Get:38 http://archive.ubuntu.com/ubuntu noble/main amd64 libnftnl11 amd64 1.2.6-2build1 [66.0 kB]
Get:39 http://archive.ubuntu.com/ubuntu noble/main amd64 iptables amd64 1.8.10-3ubuntu2 [381 kB]
Get:40 http://archive.ubuntu.com/ubuntu noble/main amd64 libjansson4 amd64 2.14-2build2 [32.8 kB]
Get:41 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libnftables1 amd64 1.0.9-1ubuntu0.1 [359 kB]
Get:42 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libbsd0 amd64 0.12.1-1build1.1 [41.2 kB]
Get:43 http://archive.ubuntu.com/ubuntu noble/main amd64 libedit2 amd64 3.1-20230828-1build1 [97.6 kB]
Get:44 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 nftables amd64 1.0.9-1ubuntu0.1 [69.8 kB]
Get:45 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 perl-modules-5.38 all 5.38.2-3.2ubuntu0.4 [3110 kB]
Get:46 http://archive.ubuntu.com/ubuntu noble/main amd64 libgdbm6t64 amd64 1.23-5.1build1 [34.4 kB]
Get:47 http://archive.ubuntu.com/ubuntu noble/main amd64 libgdbm-compat4t64 amd64 1.23-5.1build1 [6710 B]
Get:48 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libperl5.38t64 amd64 5.38.2-3.2ubuntu0.4 [4870 kB]
Get:49 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 perl amd64 5.38.2-3.2ubuntu0.4 [231 kB]
Get:50 http://archive.ubuntu.com/ubuntu noble/universe amd64 pigz amd64 2.8-1 [65.6 kB]
Get:51 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libsmartcols1 amd64 2.39.3-9ubuntu6.6 [66.3 kB]
Get:52 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libdbus-1-3 amd64 1.14.10-4ubuntu4.1 [210 kB]
Get:53 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dbus-bin amd64 1.14.10-4ubuntu4.1 [39.3 kB]
Get:54 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dbus-session-bus-common all 1.14.10-4ubuntu4.1 [80.5 kB]
Get:55 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dbus-daemon amd64 1.14.10-4ubuntu4.1 [118 kB]
Get:56 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dbus-system-bus-common all 1.14.10-4ubuntu4.1 [81.6 kB]
Get:57 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dbus amd64 1.14.10-4ubuntu4.1 [24.3 kB]
Get:58 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libpam-systemd amd64 255.4-1ubuntu8.17 [235 kB]
Get:59 https://download.docker.com/linux/ubuntu noble/stable amd64 docker-ce amd64 5:29.7.2-1~ubuntu.24.04~noble [24.0 MB]
Get:60 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dbus-user-session amd64 1.14.10-4ubuntu4.1 [9968 B]
Get:61 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 dmsetup amd64 2:1.02.185-3ubuntu3.2 [79.2 kB]
Get:62 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libglib2.0-0t64 amd64 2.80.0-6ubuntu3.8 [1545 kB]
Get:63 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 gir1.2-glib-2.0 amd64 2.80.0-6ubuntu3.8 [183 kB]
Get:64 http://archive.ubuntu.com/ubuntu noble/main amd64 libgirepository-1.0-1 amd64 1.80.1-1 [81.9 kB]
Get:65 http://archive.ubuntu.com/ubuntu noble/main amd64 gir1.2-girepository-2.0 amd64 1.80.1-1 [24.5 kB]
Get:66 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 less amd64 590-2ubuntu2.1 [142 kB]
Get:67 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libglib2.0-data all 2.80.0-6ubuntu3.8 [49.6 kB]
Get:68 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libicu74 amd64 74.2-1ubuntu3.1 [10.9 MB]
Get:69 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libnss-systemd amd64 255.4-1ubuntu8.17 [159 kB]
Get:70 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libxml2 amd64 2.9.14+dfsg-1.3ubuntu3.8 [764 kB]
Get:71 http://archive.ubuntu.com/ubuntu noble/main amd64 python3-dbus amd64 1.3.2-5build3 [100 kB]
Get:72 http://archive.ubuntu.com/ubuntu noble/main amd64 python3-gi amd64 3.48.2-1 [232 kB]
Get:73 http://archive.ubuntu.com/ubuntu noble/main amd64 networkd-dispatcher all 2.2.4-1 [15.5 kB]
Get:74 http://archive.ubuntu.com/ubuntu noble/main amd64 shared-mime-info amd64 2.4-4 [474 kB]
Get:75 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 systemd-resolved amd64 255.4-1ubuntu8.17 [297 kB]
Get:76 https://download.docker.com/linux/ubuntu noble/stable amd64 docker-buildx-plugin amd64 0.37.0-1~ubuntu.24.04~noble [17.3 MB]
Get:77 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 systemd-timesyncd amd64 255.4-1ubuntu8.17 [35.3 kB]
Get:78 http://archive.ubuntu.com/ubuntu noble/main amd64 xdg-user-dirs amd64 0.18-1build1 [18.4 kB]
Get:79 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 apparmor amd64 4.0.1really4.0.1-0ubuntu0.24.04.7 [640 kB]
Get:80 http://archive.ubuntu.com/ubuntu noble/main amd64 libcbor0.10 amd64 0.10.2-1.2ubuntu2 [25.8 kB]
Get:81 http://archive.ubuntu.com/ubuntu noble/main amd64 libfido2-1 amd64 1.14.0-1build3 [83.5 kB]
Get:82 http://archive.ubuntu.com/ubuntu noble/main amd64 libxau6 amd64 1:1.0.9-1build6 [7160 B]
Get:83 http://archive.ubuntu.com/ubuntu noble/main amd64 libxdmcp6 amd64 1:1.1.3-0ubuntu6 [10.3 kB]
Get:84 http://archive.ubuntu.com/ubuntu noble/main amd64 libxcb1 amd64 1.15-1ubuntu2 [47.7 kB]
Get:85 http://archive.ubuntu.com/ubuntu noble/main amd64 libx11-data all 2:1.8.7-1build1 [115 kB]
Get:86 http://archive.ubuntu.com/ubuntu noble/main amd64 libx11-6 amd64 2:1.8.7-1build1 [650 kB]
Get:87 http://archive.ubuntu.com/ubuntu noble/main amd64 libxext6 amd64 2:1.3.4-1build2 [30.4 kB]
Get:88 http://archive.ubuntu.com/ubuntu noble/main amd64 libxmuu1 amd64 2:1.1.3-3build2 [8958 B]
Get:89 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 openssh-client amd64 1:9.6p1-3ubuntu13.18 [908 kB]
Get:90 http://archive.ubuntu.com/ubuntu noble/main amd64 xauth amd64 1:1.1.2-1build1 [25.6 kB]
Get:91 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 xz-utils amd64 5.6.1+really5.4.5-1ubuntu0.3 [267 kB]
Get:92 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libcurl3t64-gnutls amd64 8.5.0-2ubuntu10.13 [335 kB]
Get:93 http://archive.ubuntu.com/ubuntu noble/main amd64 liberror-perl all 0.17029-2 [25.6 kB]
Get:94 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git-man all 1:2.43.0-1ubuntu7.3 [1100 kB]
Get:95 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 git amd64 1:2.43.0-1ubuntu7.3 [3680 kB]
Get:96 http://archive.ubuntu.com/ubuntu noble/main amd64 patch amd64 2.7.6-7build3 [104 kB]
Get:97 https://download.docker.com/linux/ubuntu noble/stable amd64 docker-ce-rootless-extras amd64 5:29.7.2-1~ubuntu.24.04~noble [10.2 MB]
Get:98 https://download.docker.com/linux/ubuntu noble/stable amd64 docker-compose-plugin amd64 5.5.0-1~ubuntu.24.04~noble [11.1 MB]
Fetched 152 MB in 12s (12.3 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5272 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking bsdutils (1:2.39.3-9ubuntu6.6) over (1:2.39.3-9ubuntu6.5) ...
Setting up bsdutils (1:2.39.3-9ubuntu6.6) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5272 files and directories currently installed.)
Preparing to unpack .../perl-base_5.38.2-3.2ubuntu0.4_amd64.deb ...
Unpacking perl-base (5.38.2-3.2ubuntu0.4) over (5.38.2-3.2ubuntu0.3) ...
Setting up perl-base (5.38.2-3.2ubuntu0.4) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5272 files and directories currently installed.)
Preparing to unpack .../util-linux_2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking util-linux (2.39.3-9ubuntu6.6) over (2.39.3-9ubuntu6.5) ...
Setting up util-linux (2.39.3-9ubuntu6.6) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5272 files and directories currently installed.)
Preparing to unpack .../mount_2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking mount (2.39.3-9ubuntu6.6) over (2.39.3-9ubuntu6.5) ...
Selecting previously unselected package libpython3.12-minimal:amd64.
Preparing to unpack .../libpython3.12-minimal_3.12.3-1ubuntu0.16_amd64.deb ...
Unpacking libpython3.12-minimal:amd64 (3.12.3-1ubuntu0.16) ...
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack .../libexpat1_2.6.1-2ubuntu0.4_amd64.deb ...
Unpacking libexpat1:amd64 (2.6.1-2ubuntu0.4) ...
Selecting previously unselected package python3.12-minimal.
Preparing to unpack .../python3.12-minimal_3.12.3-1ubuntu0.16_amd64.deb ...
Unpacking python3.12-minimal (3.12.3-1ubuntu0.16) ...
Setting up libpython3.12-minimal:amd64 (3.12.3-1ubuntu0.16) ...
Setting up libexpat1:amd64 (2.6.1-2ubuntu0.4) ...
Setting up python3.12-minimal (3.12.3-1ubuntu0.16) ...
Selecting previously unselected package python3-minimal.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5591 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.12.3-0ubuntu2.1_amd64.deb ...
Unpacking python3-minimal (3.12.3-0ubuntu2.1) ...
Selecting previously unselected package media-types.
Preparing to unpack .../1-media-types_10.1.0_all.deb ...
Unpacking media-types (10.1.0) ...
Selecting previously unselected package netbase.
Preparing to unpack .../2-netbase_6.4_all.deb ...
Unpacking netbase (6.4) ...
Selecting previously unselected package tzdata.
Preparing to unpack .../3-tzdata_2026c-0ubuntu0.24.04.1_all.deb ...
Unpacking tzdata (2026c-0ubuntu0.24.04.1) ...
Selecting previously unselected package libpython3.12-stdlib:amd64.
Preparing to unpack .../4-libpython3.12-stdlib_3.12.3-1ubuntu0.16_amd64.deb ...
Unpacking libpython3.12-stdlib:amd64 (3.12.3-1ubuntu0.16) ...
Selecting previously unselected package python3.12.
Preparing to unpack .../5-python3.12_3.12.3-1ubuntu0.16_amd64.deb ...
Unpacking python3.12 (3.12.3-1ubuntu0.16) ...
Selecting previously unselected package libpython3-stdlib:amd64.
Preparing to unpack .../6-libpython3-stdlib_3.12.3-0ubuntu2.1_amd64.deb ...
Unpacking libpython3-stdlib:amd64 (3.12.3-0ubuntu2.1) ...
Setting up python3-minimal (3.12.3-0ubuntu2.1) ...
Selecting previously unselected package python3.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 6561 files and directories currently installed.)
Preparing to unpack .../python3_3.12.3-0ubuntu2.1_amd64.deb ...
Unpacking python3 (3.12.3-0ubuntu2.1) ...
Selecting previously unselected package libapparmor1:amd64.
Preparing to unpack .../libapparmor1_4.0.1really4.0.1-0ubuntu0.24.04.7_amd64.deb ...
Unpacking libapparmor1:amd64 (4.0.1really4.0.1-0ubuntu0.24.04.7) ...
Selecting previously unselected package libargon2-1:amd64.
Preparing to unpack .../libargon2-1_0~20190702+dfsg-4build1_amd64.deb ...
Unpacking libargon2-1:amd64 (0~20190702+dfsg-4build1) ...
Preparing to unpack .../libblkid1_2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking libblkid1:amd64 (2.39.3-9ubuntu6.6) over (2.39.3-9ubuntu6.5) ...
Setting up libblkid1:amd64 (2.39.3-9ubuntu6.6) ...
Selecting previously unselected package libdevmapper1.02.1:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 6591 files and directories currently installed.)
Preparing to unpack .../libdevmapper1.02.1_2%3a1.02.185-3ubuntu3.2_amd64.deb ...
Unpacking libdevmapper1.02.1:amd64 (2:1.02.185-3ubuntu3.2) ...
Selecting previously unselected package libjson-c5:amd64.
Preparing to unpack .../libjson-c5_0.17-1build1_amd64.deb ...
Unpacking libjson-c5:amd64 (0.17-1build1) ...
Preparing to unpack .../libuuid1_2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking libuuid1:amd64 (2.39.3-9ubuntu6.6) over (2.39.3-9ubuntu6.5) ...
Setting up libuuid1:amd64 (2.39.3-9ubuntu6.6) ...
Selecting previously unselected package libcryptsetup12:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 6602 files and directories currently installed.)
Preparing to unpack .../libcryptsetup12_2%3a2.7.0-1ubuntu4.2_amd64.deb ...
Unpacking libcryptsetup12:amd64 (2:2.7.0-1ubuntu4.2) ...
Selecting previously unselected package libfdisk1:amd64.
Preparing to unpack .../libfdisk1_2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking libfdisk1:amd64 (2.39.3-9ubuntu6.6) ...
Selecting previously unselected package libkmod2:amd64.
Preparing to unpack .../libkmod2_31+20240202-2ubuntu7.2_amd64.deb ...
Unpacking libkmod2:amd64 (31+20240202-2ubuntu7.2) ...
Preparing to unpack .../libmount1_2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking libmount1:amd64 (2.39.3-9ubuntu6.6) over (2.39.3-9ubuntu6.5) ...
Setting up libmount1:amd64 (2.39.3-9ubuntu6.6) ...
Selecting previously unselected package libsystemd-shared:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 6622 files and directories currently installed.)
Preparing to unpack .../libsystemd-shared_255.4-1ubuntu8.17_amd64.deb ...
Unpacking libsystemd-shared:amd64 (255.4-1ubuntu8.17) ...
Selecting previously unselected package systemd-dev.
Preparing to unpack .../systemd-dev_255.4-1ubuntu8.17_all.deb ...
Unpacking systemd-dev (255.4-1ubuntu8.17) ...
Selecting previously unselected package systemd.
Preparing to unpack .../systemd_255.4-1ubuntu8.17_amd64.deb ...
Unpacking systemd (255.4-1ubuntu8.17) ...
Setting up libapparmor1:amd64 (4.0.1really4.0.1-0ubuntu0.24.04.7) ...
Setting up libargon2-1:amd64 (0~20190702+dfsg-4build1) ...
Setting up libdevmapper1.02.1:amd64 (2:1.02.185-3ubuntu3.2) ...
Setting up libjson-c5:amd64 (0.17-1build1) ...
Setting up libcryptsetup12:amd64 (2:2.7.0-1ubuntu4.2) ...
Setting up libfdisk1:amd64 (2.39.3-9ubuntu6.6) ...
Setting up libkmod2:amd64 (31+20240202-2ubuntu7.2) ...
Setting up libsystemd-shared:amd64 (255.4-1ubuntu8.17) ...
Setting up systemd-dev (255.4-1ubuntu8.17) ...
Setting up mount (2.39.3-9ubuntu6.6) ...
Setting up systemd (255.4-1ubuntu8.17) ...
Created symlink /etc/systemd/system/getty.target.wants/getty@tty1.service → /usr/lib/systemd/system/getty@.service.
Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target → /usr/lib/systemd/system/remote-fs.target.
Created symlink /etc/systemd/system/sysinit.target.wants/systemd-pstore.service → /usr/lib/systemd/system/systemd-pstore.service.
Initializing machine ID from random generator.
/usr/lib/tmpfiles.d/systemd-network.conf:10: Failed to resolve user 'systemd-network': No such process
/usr/lib/tmpfiles.d/systemd-network.conf:11: Failed to resolve user 'systemd-network': No such process
/usr/lib/tmpfiles.d/systemd-network.conf:12: Failed to resolve user 'systemd-network': No such process
/usr/lib/tmpfiles.d/systemd-network.conf:13: Failed to resolve user 'systemd-network': No such process
/usr/lib/tmpfiles.d/systemd.conf:22: Failed to resolve group 'systemd-journal': No such process
/usr/lib/tmpfiles.d/systemd.conf:23: Failed to resolve group 'systemd-journal': No such process
/usr/lib/tmpfiles.d/systemd.conf:28: Failed to resolve group 'systemd-journal': No such process
/usr/lib/tmpfiles.d/systemd.conf:29: Failed to resolve group 'systemd-journal': No such process
/usr/lib/tmpfiles.d/systemd.conf:30: Failed to resolve group 'systemd-journal': No such process
Creating group 'systemd-journal' with GID 999.
Creating group 'systemd-network' with GID 998.
Creating user 'systemd-network' (systemd Network Management) with UID 998 and GID 998.
Selecting previously unselected package systemd-sysv.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 7608 files and directories currently installed.)
Preparing to unpack .../00-systemd-sysv_255.4-1ubuntu8.17_amd64.deb ...
Unpacking systemd-sysv (255.4-1ubuntu8.17) ...
Selecting previously unselected package containerd.io.
Preparing to unpack .../01-containerd.io_2.3.4-1~ubuntu.24.04~noble_amd64.deb ...
Unpacking containerd.io (2.3.4-1~ubuntu.24.04~noble) ...
Selecting previously unselected package docker-ce-cli.
Preparing to unpack .../02-docker-ce-cli_5%3a29.7.2-1~ubuntu.24.04~noble_amd64.deb ...
Unpacking docker-ce-cli (5:29.7.2-1~ubuntu.24.04~noble) ...
Selecting previously unselected package libip4tc2:amd64.
Preparing to unpack .../03-libip4tc2_1.8.10-3ubuntu2_amd64.deb ...
Unpacking libip4tc2:amd64 (1.8.10-3ubuntu2) ...
Selecting previously unselected package libip6tc2:amd64.
Preparing to unpack .../04-libip6tc2_1.8.10-3ubuntu2_amd64.deb ...
Unpacking libip6tc2:amd64 (1.8.10-3ubuntu2) ...
Selecting previously unselected package libxtables12:amd64.
Preparing to unpack .../05-libxtables12_1.8.10-3ubuntu2_amd64.deb ...
Unpacking libxtables12:amd64 (1.8.10-3ubuntu2) ...
Selecting previously unselected package libmnl0:amd64.
Preparing to unpack .../06-libmnl0_1.0.5-2build1_amd64.deb ...
Unpacking libmnl0:amd64 (1.0.5-2build1) ...
Selecting previously unselected package libnfnetlink0:amd64.
Preparing to unpack .../07-libnfnetlink0_1.0.2-2build1_amd64.deb ...
Unpacking libnfnetlink0:amd64 (1.0.2-2build1) ...
Selecting previously unselected package libnetfilter-conntrack3:amd64.
Preparing to unpack .../08-libnetfilter-conntrack3_1.0.9-6build1_amd64.deb ...
Unpacking libnetfilter-conntrack3:amd64 (1.0.9-6build1) ...
Selecting previously unselected package libnftnl11:amd64.
Preparing to unpack .../09-libnftnl11_1.2.6-2build1_amd64.deb ...
Unpacking libnftnl11:amd64 (1.2.6-2build1) ...
Selecting previously unselected package iptables.
Preparing to unpack .../10-iptables_1.8.10-3ubuntu2_amd64.deb ...
Unpacking iptables (1.8.10-3ubuntu2) ...
Selecting previously unselected package libjansson4:amd64.
Preparing to unpack .../11-libjansson4_2.14-2build2_amd64.deb ...
Unpacking libjansson4:amd64 (2.14-2build2) ...
Selecting previously unselected package libnftables1:amd64.
Preparing to unpack .../12-libnftables1_1.0.9-1ubuntu0.1_amd64.deb ...
Unpacking libnftables1:amd64 (1.0.9-1ubuntu0.1) ...
Selecting previously unselected package libbsd0:amd64.
Preparing to unpack .../13-libbsd0_0.12.1-1build1.1_amd64.deb ...
Unpacking libbsd0:amd64 (0.12.1-1build1.1) ...
Selecting previously unselected package libedit2:amd64.
Preparing to unpack .../14-libedit2_3.1-20230828-1build1_amd64.deb ...
Unpacking libedit2:amd64 (3.1-20230828-1build1) ...
Selecting previously unselected package nftables.
Preparing to unpack .../15-nftables_1.0.9-1ubuntu0.1_amd64.deb ...
Unpacking nftables (1.0.9-1ubuntu0.1) ...
Selecting previously unselected package docker-ce.
Preparing to unpack .../16-docker-ce_5%3a29.7.2-1~ubuntu.24.04~noble_amd64.deb ...
Unpacking docker-ce (5:29.7.2-1~ubuntu.24.04~noble) ...
Selecting previously unselected package perl-modules-5.38.
Preparing to unpack .../17-perl-modules-5.38_5.38.2-3.2ubuntu0.4_all.deb ...
Unpacking perl-modules-5.38 (5.38.2-3.2ubuntu0.4) ...
Selecting previously unselected package libgdbm6t64:amd64.
Preparing to unpack .../18-libgdbm6t64_1.23-5.1build1_amd64.deb ...
Unpacking libgdbm6t64:amd64 (1.23-5.1build1) ...
Selecting previously unselected package libgdbm-compat4t64:amd64.
Preparing to unpack .../19-libgdbm-compat4t64_1.23-5.1build1_amd64.deb ...
Unpacking libgdbm-compat4t64:amd64 (1.23-5.1build1) ...
Selecting previously unselected package libperl5.38t64:amd64.
Preparing to unpack .../20-libperl5.38t64_5.38.2-3.2ubuntu0.4_amd64.deb ...
Unpacking libperl5.38t64:amd64 (5.38.2-3.2ubuntu0.4) ...
Selecting previously unselected package perl.
Preparing to unpack .../21-perl_5.38.2-3.2ubuntu0.4_amd64.deb ...
Unpacking perl (5.38.2-3.2ubuntu0.4) ...
Selecting previously unselected package pigz.
Preparing to unpack .../22-pigz_2.8-1_amd64.deb ...
Unpacking pigz (2.8-1) ...
Preparing to unpack .../23-libsmartcols1_2.39.3-9ubuntu6.6_amd64.deb ...
Unpacking libsmartcols1:amd64 (2.39.3-9ubuntu6.6) over (2.39.3-9ubuntu6.5) ...
Setting up libsmartcols1:amd64 (2.39.3-9ubuntu6.6) ...
Selecting previously unselected package libdbus-1-3:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10172 files and directories currently installed.)
Preparing to unpack .../00-libdbus-1-3_1.14.10-4ubuntu4.1_amd64.deb ...
Unpacking libdbus-1-3:amd64 (1.14.10-4ubuntu4.1) ...
Selecting previously unselected package dbus-bin.
Preparing to unpack .../01-dbus-bin_1.14.10-4ubuntu4.1_amd64.deb ...
Unpacking dbus-bin (1.14.10-4ubuntu4.1) ...
Selecting previously unselected package dbus-session-bus-common.
Preparing to unpack .../02-dbus-session-bus-common_1.14.10-4ubuntu4.1_all.deb ...
Unpacking dbus-session-bus-common (1.14.10-4ubuntu4.1) ...
Selecting previously unselected package dbus-daemon.
Preparing to unpack .../03-dbus-daemon_1.14.10-4ubuntu4.1_amd64.deb ...
Unpacking dbus-daemon (1.14.10-4ubuntu4.1) ...
Selecting previously unselected package dbus-system-bus-common.
Preparing to unpack .../04-dbus-system-bus-common_1.14.10-4ubuntu4.1_all.deb ...
Unpacking dbus-system-bus-common (1.14.10-4ubuntu4.1) ...
Selecting previously unselected package dbus.
Preparing to unpack .../05-dbus_1.14.10-4ubuntu4.1_amd64.deb ...
Unpacking dbus (1.14.10-4ubuntu4.1) ...
Selecting previously unselected package libpam-systemd:amd64.
Preparing to unpack .../06-libpam-systemd_255.4-1ubuntu8.17_amd64.deb ...
Unpacking libpam-systemd:amd64 (255.4-1ubuntu8.17) ...
Selecting previously unselected package dbus-user-session.
Preparing to unpack .../07-dbus-user-session_1.14.10-4ubuntu4.1_amd64.deb ...
Unpacking dbus-user-session (1.14.10-4ubuntu4.1) ...
Selecting previously unselected package dmsetup.
Preparing to unpack .../08-dmsetup_2%3a1.02.185-3ubuntu3.2_amd64.deb ...
Unpacking dmsetup (2:1.02.185-3ubuntu3.2) ...
Selecting previously unselected package libglib2.0-0t64:amd64.
Preparing to unpack .../09-libglib2.0-0t64_2.80.0-6ubuntu3.8_amd64.deb ...
Unpacking libglib2.0-0t64:amd64 (2.80.0-6ubuntu3.8) ...
Selecting previously unselected package gir1.2-glib-2.0:amd64.
Preparing to unpack .../10-gir1.2-glib-2.0_2.80.0-6ubuntu3.8_amd64.deb ...
Unpacking gir1.2-glib-2.0:amd64 (2.80.0-6ubuntu3.8) ...
Selecting previously unselected package libgirepository-1.0-1:amd64.
Preparing to unpack .../11-libgirepository-1.0-1_1.80.1-1_amd64.deb ...
Unpacking libgirepository-1.0-1:amd64 (1.80.1-1) ...
Selecting previously unselected package gir1.2-girepository-2.0:amd64.
Preparing to unpack .../12-gir1.2-girepository-2.0_1.80.1-1_amd64.deb ...
Unpacking gir1.2-girepository-2.0:amd64 (1.80.1-1) ...
Selecting previously unselected package less.
Preparing to unpack .../13-less_590-2ubuntu2.1_amd64.deb ...
Unpacking less (590-2ubuntu2.1) ...
Selecting previously unselected package libglib2.0-data.
Preparing to unpack .../14-libglib2.0-data_2.80.0-6ubuntu3.8_all.deb ...
Unpacking libglib2.0-data (2.80.0-6ubuntu3.8) ...
Selecting previously unselected package libicu74:amd64.
Preparing to unpack .../15-libicu74_74.2-1ubuntu3.1_amd64.deb ...
Unpacking libicu74:amd64 (74.2-1ubuntu3.1) ...
Selecting previously unselected package libnss-systemd:amd64.
Preparing to unpack .../16-libnss-systemd_255.4-1ubuntu8.17_amd64.deb ...
Unpacking libnss-systemd:amd64 (255.4-1ubuntu8.17) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../17-libxml2_2.9.14+dfsg-1.3ubuntu3.8_amd64.deb ...
Unpacking libxml2:amd64 (2.9.14+dfsg-1.3ubuntu3.8) ...
Selecting previously unselected package python3-dbus.
Preparing to unpack .../18-python3-dbus_1.3.2-5build3_amd64.deb ...
Unpacking python3-dbus (1.3.2-5build3) ...
Selecting previously unselected package python3-gi.
Preparing to unpack .../19-python3-gi_3.48.2-1_amd64.deb ...
Unpacking python3-gi (3.48.2-1) ...
Selecting previously unselected package networkd-dispatcher.
Preparing to unpack .../20-networkd-dispatcher_2.2.4-1_all.deb ...
Unpacking networkd-dispatcher (2.2.4-1) ...
Selecting previously unselected package shared-mime-info.
Preparing to unpack .../21-shared-mime-info_2.4-4_amd64.deb ...
Unpacking shared-mime-info (2.4-4) ...
Selecting previously unselected package systemd-resolved.
Preparing to unpack .../22-systemd-resolved_255.4-1ubuntu8.17_amd64.deb ...
Unpacking systemd-resolved (255.4-1ubuntu8.17) ...
Selecting previously unselected package systemd-timesyncd.
Preparing to unpack .../23-systemd-timesyncd_255.4-1ubuntu8.17_amd64.deb ...
Unpacking systemd-timesyncd (255.4-1ubuntu8.17) ...
Selecting previously unselected package xdg-user-dirs.
Preparing to unpack .../24-xdg-user-dirs_0.18-1build1_amd64.deb ...
Unpacking xdg-user-dirs (0.18-1build1) ...
Selecting previously unselected package apparmor.
Preparing to unpack .../25-apparmor_4.0.1really4.0.1-0ubuntu0.24.04.7_amd64.deb ...
Unpacking apparmor (4.0.1really4.0.1-0ubuntu0.24.04.7) ...
Selecting previously unselected package libcbor0.10:amd64.
Preparing to unpack .../26-libcbor0.10_0.10.2-1.2ubuntu2_amd64.deb ...
Unpacking libcbor0.10:amd64 (0.10.2-1.2ubuntu2) ...
Selecting previously unselected package libfido2-1:amd64.
Preparing to unpack .../27-libfido2-1_1.14.0-1build3_amd64.deb ...
Unpacking libfido2-1:amd64 (1.14.0-1build3) ...
Selecting previously unselected package libxau6:amd64.
Preparing to unpack .../28-libxau6_1%3a1.0.9-1build6_amd64.deb ...
Unpacking libxau6:amd64 (1:1.0.9-1build6) ...
Selecting previously unselected package libxdmcp6:amd64.
Preparing to unpack .../29-libxdmcp6_1%3a1.1.3-0ubuntu6_amd64.deb ...
Unpacking libxdmcp6:amd64 (1:1.1.3-0ubuntu6) ...
Selecting previously unselected package libxcb1:amd64.
Preparing to unpack .../30-libxcb1_1.15-1ubuntu2_amd64.deb ...
Unpacking libxcb1:amd64 (1.15-1ubuntu2) ...
Selecting previously unselected package libx11-data.
Preparing to unpack .../31-libx11-data_2%3a1.8.7-1build1_all.deb ...
Unpacking libx11-data (2:1.8.7-1build1) ...
Selecting previously unselected package libx11-6:amd64.
Preparing to unpack .../32-libx11-6_2%3a1.8.7-1build1_amd64.deb ...
Unpacking libx11-6:amd64 (2:1.8.7-1build1) ...
Selecting previously unselected package libxext6:amd64.
Preparing to unpack .../33-libxext6_2%3a1.3.4-1build2_amd64.deb ...
Unpacking libxext6:amd64 (2:1.3.4-1build2) ...
Selecting previously unselected package libxmuu1:amd64.
Preparing to unpack .../34-libxmuu1_2%3a1.1.3-3build2_amd64.deb ...
Unpacking libxmuu1:amd64 (2:1.1.3-3build2) ...
Selecting previously unselected package openssh-client.
Preparing to unpack .../35-openssh-client_1%3a9.6p1-3ubuntu13.18_amd64.deb ...
Unpacking openssh-client (1:9.6p1-3ubuntu13.18) ...
Selecting previously unselected package xauth.
Preparing to unpack .../36-xauth_1%3a1.1.2-1build1_amd64.deb ...
Unpacking xauth (1:1.1.2-1build1) ...
Selecting previously unselected package xz-utils.
Preparing to unpack .../37-xz-utils_5.6.1+really5.4.5-1ubuntu0.3_amd64.deb ...
Unpacking xz-utils (5.6.1+really5.4.5-1ubuntu0.3) ...
Selecting previously unselected package docker-buildx-plugin.
Preparing to unpack .../38-docker-buildx-plugin_0.37.0-1~ubuntu.24.04~noble_amd64.deb ...
Unpacking docker-buildx-plugin (0.37.0-1~ubuntu.24.04~noble) ...
Selecting previously unselected package docker-ce-rootless-extras.
Preparing to unpack .../39-docker-ce-rootless-extras_5%3a29.7.2-1~ubuntu.24.04~noble_amd64.deb ...
Unpacking docker-ce-rootless-extras (5:29.7.2-1~ubuntu.24.04~noble) ...
Selecting previously unselected package docker-compose-plugin.
Preparing to unpack .../40-docker-compose-plugin_5.5.0-1~ubuntu.24.04~noble_amd64.deb ...
Unpacking docker-compose-plugin (5.5.0-1~ubuntu.24.04~noble) ...
Selecting previously unselected package libcurl3t64-gnutls:amd64.
Preparing to unpack .../41-libcurl3t64-gnutls_8.5.0-2ubuntu10.13_amd64.deb ...
Unpacking libcurl3t64-gnutls:amd64 (8.5.0-2ubuntu10.13) ...
Selecting previously unselected package liberror-perl.
Preparing to unpack .../42-liberror-perl_0.17029-2_all.deb ...
Unpacking liberror-perl (0.17029-2) ...
Selecting previously unselected package git-man.
Preparing to unpack .../43-git-man_1%3a2.43.0-1ubuntu7.3_all.deb ...
Unpacking git-man (1:2.43.0-1ubuntu7.3) ...
Selecting previously unselected package git.
Preparing to unpack .../44-git_1%3a2.43.0-1ubuntu7.3_amd64.deb ...
Unpacking git (1:2.43.0-1ubuntu7.3) ...
Selecting previously unselected package patch.
Preparing to unpack .../45-patch_2.7.6-7build3_amd64.deb ...
Unpacking patch (2.7.6-7build3) ...
Setting up libip4tc2:amd64 (1.8.10-3ubuntu2) ...
Setting up media-types (10.1.0) ...
Setting up systemd-sysv (255.4-1ubuntu8.17) ...
Setting up libxau6:amd64 (1:1.0.9-1build6) ...
Setting up libgdbm6t64:amd64 (1.23-5.1build1) ...
Setting up libgdbm-compat4t64:amd64 (1.23-5.1build1) ...
Setting up xdg-user-dirs (0.18-1build1) ...
Setting up libcbor0.10:amd64 (0.10.2-1.2ubuntu2) ...
Setting up libip6tc2:amd64 (1.8.10-3ubuntu2) ...
Setting up libcurl3t64-gnutls:amd64 (8.5.0-2ubuntu10.13) ...
Setting up less (590-2ubuntu2.1) ...
Setting up libnss-systemd:amd64 (255.4-1ubuntu8.17) ...
Setting up libjansson4:amd64 (2.14-2build2) ...
Setting up tzdata (2026c-0ubuntu0.24.04.1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Thu Sep 3 09:14:37 UTC 2026.
Universal Time is now: Thu Sep 3 09:14:37 UTC 2026.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Setting up apparmor (4.0.1really4.0.1-0ubuntu0.24.04.7) ...
Created symlink /etc/systemd/system/sysinit.target.wants/apparmor.service → /usr/lib/systemd/system/apparmor.service.
Setting up docker-buildx-plugin (0.37.0-1~ubuntu.24.04~noble) ...
Setting up libglib2.0-0t64:amd64 (2.80.0-6ubuntu3.8) ...
No schema files found: doing nothing.
Setting up libglib2.0-data (2.80.0-6ubuntu3.8) ...
Setting up libx11-data (2:1.8.7-1build1) ...
Setting up libdbus-1-3:amd64 (1.14.10-4ubuntu4.1) ...
Setting up xz-utils (5.6.1+really5.4.5-1ubuntu0.3) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
update-alternatives: warning: skip creation of /usr/share/man/man1/lzma.1.gz because associated file /usr/share/man/man1/xz.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/unlzma.1.gz because associated file /usr/share/man/man1/unxz.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzcat.1.gz because associated file /usr/share/man/man1/xzcat.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzmore.1.gz because associated file /usr/share/man/man1/xzmore.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzless.1.gz because associated file /usr/share/man/man1/xzless.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzdiff.1.gz because associated file /usr/share/man/man1/xzdiff.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzcmp.1.gz because associated file /usr/share/man/man1/xzcmp.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzgrep.1.gz because associated file /usr/share/man/man1/xzgrep.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzegrep.1.gz because associated file /usr/share/man/man1/xzegrep.1.gz (of link group lzma) doesn't exist
update-alternatives: warning: skip creation of /usr/share/man/man1/lzfgrep.1.gz because associated file /usr/share/man/man1/xzfgrep.1.gz (of link group lzma) doesn't exist
Setting up perl-modules-5.38 (5.38.2-3.2ubuntu0.4) ...
Setting up libmnl0:amd64 (1.0.5-2build1) ...
Setting up systemd-timesyncd (255.4-1ubuntu8.17) ...
Creating group 'systemd-timesync' with GID 997.
Creating user 'systemd-timesync' (systemd Time Synchronization) with UID 997 and GID 997.
Created symlink /etc/systemd/system/dbus-org.freedesktop.timesync1.service → /usr/lib/systemd/system/systemd-timesyncd.service.
Created symlink /etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service → /usr/lib/systemd/system/systemd-timesyncd.service.
Setting up containerd.io (2.3.4-1~ubuntu.24.04~noble) ...
Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /usr/lib/systemd/system/containerd.service.
Setting up patch (2.7.6-7build3) ...
Setting up docker-compose-plugin (5.5.0-1~ubuntu.24.04~noble) ...
Setting up gir1.2-glib-2.0:amd64 (2.80.0-6ubuntu3.8) ...
Setting up libxtables12:amd64 (1.8.10-3ubuntu2) ...
Setting up libicu74:amd64 (74.2-1ubuntu3.1) ...
Setting up docker-ce-cli (5:29.7.2-1~ubuntu.24.04~noble) ...
Setting up dmsetup (2:1.02.185-3ubuntu3.2) ...
Setting up pigz (2.8-1) ...
Setting up libnfnetlink0:amd64 (1.0.2-2build1) ...
Setting up dbus-session-bus-common (1.14.10-4ubuntu4.1) ...
Setting up git-man (1:2.43.0-1ubuntu7.3) ...
Setting up libgirepository-1.0-1:amd64 (1.80.1-1) ...
Setting up netbase (6.4) ...
Setting up libperl5.38t64:amd64 (5.38.2-3.2ubuntu0.4) ...
Setting up dbus-system-bus-common (1.14.10-4ubuntu4.1) ...
Setting up libfido2-1:amd64 (1.14.0-1build3) ...
Setting up libbsd0:amd64 (0.12.1-1build1.1) ...
Setting up libxml2:amd64 (2.9.14+dfsg-1.3ubuntu3.8) ...
Setting up dbus-bin (1.14.10-4ubuntu4.1) ...
Setting up libxdmcp6:amd64 (1:1.1.3-0ubuntu6) ...
Setting up libxcb1:amd64 (1.15-1ubuntu2) ...
Setting up libpython3.12-stdlib:amd64 (3.12.3-1ubuntu0.16) ...
Setting up python3.12 (3.12.3-1ubuntu0.16) ...
Setting up libedit2:amd64 (3.1-20230828-1build1) ...
Setting up libnftnl11:amd64 (1.2.6-2build1) ...
Setting up dbus-daemon (1.14.10-4ubuntu4.1) ...
Setting up perl (5.38.2-3.2ubuntu0.4) ...
Setting up gir1.2-girepository-2.0:amd64 (1.80.1-1) ...
Setting up dbus (1.14.10-4ubuntu4.1) ...
Setting up shared-mime-info (2.4-4) ...
Setting up libnetfilter-conntrack3:amd64 (1.0.9-6build1) ...
Setting up libpam-systemd:amd64 (255.4-1ubuntu8.17) ...
Setting up libx11-6:amd64 (2:1.8.7-1build1) ...
Setting up libxmuu1:amd64 (2:1.1.3-3build2) ...
Setting up libpython3-stdlib:amd64 (3.12.3-0ubuntu2.1) ...
Setting up systemd-resolved (255.4-1ubuntu8.17) ...
Converting /etc/resolv.conf to a symlink to /run/systemd/resolve/stub-resolv.conf...
mv: cannot move '/etc/resolv.conf' to '/etc/.resolv.conf.systemd-resolved.bak': Device or resource busy
Cannot take a backup of /etc/resolv.conf.
ln: failed to create symbolic link '/etc/resolv.conf': Device or resource busy
Cannot install symlink from /etc/resolv.conf to ../run/systemd/resolve/stub-resolv.conf
Creating group 'systemd-resolve' with GID 996.
Creating user 'systemd-resolve' (systemd Resolver) with UID 996 and GID 996.
Created symlink /etc/systemd/system/dbus-org.freedesktop.resolve1.service → /usr/lib/systemd/system/systemd-resolved.service.
Created symlink /etc/systemd/system/sysinit.target.wants/systemd-resolved.service → /usr/lib/systemd/system/systemd-resolved.service.
Setting up libnftables1:amd64 (1.0.9-1ubuntu0.1) ...
Setting up nftables (1.0.9-1ubuntu0.1) ...
Setting up iptables (1.8.10-3ubuntu2) ...
update-alternatives: using /usr/sbin/iptables-legacy to provide /usr/sbin/iptables (iptables) in auto mode
update-alternatives: using /usr/sbin/ip6tables-legacy to provide /usr/sbin/ip6tables (ip6tables) in auto mode
update-alternatives: using /usr/sbin/iptables-nft to provide /usr/sbin/iptables (iptables) in auto mode
update-alternatives: using /usr/sbin/ip6tables-nft to provide /usr/sbin/ip6tables (ip6tables) in auto mode
update-alternatives: using /usr/sbin/arptables-nft to provide /usr/sbin/arptables (arptables) in auto mode
update-alternatives: using /usr/sbin/ebtables-nft to provide /usr/sbin/ebtables (ebtables) in auto mode
Setting up openssh-client (1:9.6p1-3ubuntu13.18) ...
Setting up libxext6:amd64 (2:1.3.4-1build2) ...
Setting up python3 (3.12.3-0ubuntu2.1) ...
Setting up liberror-perl (0.17029-2) ...
Setting up dbus-user-session (1.14.10-4ubuntu4.1) ...
Setting up docker-ce (5:29.7.2-1~ubuntu.24.04~noble) ...
invoke-rc.d: could not determine current runlevel
invoke-rc.d: policy-rc.d denied execution of start.
Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /usr/lib/systemd/system/docker.service.
Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /usr/lib/systemd/system/docker.socket.
Setting up python3-gi (3.48.2-1) ...
Setting up git (1:2.43.0-1ubuntu7.3) ...
Setting up xauth (1:1.1.2-1build1) ...
Setting up docker-ce-rootless-extras (5:29.7.2-1~ubuntu.24.04~noble) ...
Setting up python3-dbus (1.3.2-5build3) ...
Setting up networkd-dispatcher (2.2.4-1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/networkd-dispatcher.service → /usr/lib/systemd/system/networkd-dispatcher.service.
Processing triggers for libc-bin (2.39-0ubuntu8.8) ...
Reading package lists...
Building dependency tree...
Reading state information...
Suggested packages:
make-doc
The following NEW packages will be installed:
make
0 upgraded, 1 newly installed, 0 to remove and 17 not upgraded.
Need to get 180 kB of archives.
After this operation, 414 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu noble/main amd64 make amd64 4.3-4.1build2 [180 kB]
Fetched 180 kB in 0s (439 kB/s)
Selecting previously unselected package make.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12463 files and directories currently installed.)
Preparing to unpack .../make_4.3-4.1build2_amd64.deb ...
Unpacking make (4.3-4.1build2) ...
Setting up make (4.3-4.1build2) ...
Reading package lists...
Building dependency tree...
Reading state information...
git is already the newest version (1:2.43.0-1ubuntu7.3).
git set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 17 not upgraded.
stderr:
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
debconf: delaying package configuration, since apt-utils is not installed
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
debconf: delaying package configuration, since apt-utils is not installed
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
debconf: delaying package configuration, since apt-utils is not installed
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
exit 0 · 73157 ms
sha256 stdout=624f9592ce0766f0c0bc437abb3c50040c064f9fe2de32e150d916498f708eb1 stderr=a52943a9f1c8103b89df14b4542abc5d73940a1d9b970b75d28647a18262e771
========================================================================
[2/3] Step 3: Get the node repository — line 316
========================================================================
command (2 lines, verbatim from the guide):
cd ~
git clone https://github.com/canopy-network/node.git
stdout: (empty)
stderr:
Cloning into 'node'...
exit 0 · 1538 ms
sha256 stdout=e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 stderr=54b52cb3d71953f8b0693b87e21e69b01ac17caf66e807584d079e4e71bc74f8
========================================================================
[3/3] Step 3: Get the node repository — line 328
========================================================================
command (2 lines, verbatim from the guide):
cd ~/node
make help
stdout:
help Show available targets
hash-password Generate a bcrypt hash for AUTH_PASSWORDHASH (prompts for password)
pull Pull the latest canopynetwork/canopy image
node-up Start the node only (no monitoring)
up Starts everything (node, monitoring, etc.)
down Stop everything
restart Restart the nodes (reload config.json changes)
logs Tail node logs
status Show container status
snapshot Download mainnet snapshots into data/ (stops nodes first)
snapshot-up Download mainnet snapshots into data/ and start nodes
gen-key First-boot: generate validator key
stderr: (empty)
exit 0 · 216 ms
sha256 stdout=b102cdd8627c209fbb51d8ff6a6ef4a608c5e9c21df28b5ddf62e5dc24310504 stderr=e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
========================================================================
transcript sha256 182f4cf2de327bd612b5327ce3ef78af85a7714f0b6fc9c5d903b8a874647100
========================================================================